
Vehicle Hitch
System
Overview

The XTIRPA Vehicle Hitch fall arrest system utilises the force of gravity to provide a reliable anchor point for confined space entry and over-edge scenarios, making it an ideal solution for bridge maintenance.
The XTIRPA Vehicle Hitch operates similarly to the well-established XTIRPA Counterweight system, using a large counterweight to balance the forces at the opposite end. However, instead of traditional weights, it utilises a van or truck connected via the tow ball / hitch.
For field operatives who already use a vehicle on site, the XTIRPA Vehicle Hitch fall arrest system makes use of existing resources, providing a more efficient, lighter, and quicker-to-deploy solution. This system is especially useful in over-edge situations, such as on bridges, or where conventional anchors are not feasible.
Various extension sections are available, allowing for different angle configurations when deploying the davit arm.
Bases and Components

IN-2126
XTIRPA 76 mm HITCH MOUNT WITH 610 mm STABILISER
Hitch mount with 610 mm stabiliser is part of a fall arrest system that connects to 51 mm square vehicle receiver hitches. Use with mast IN-2003 and davit arm IN-2210. Comes with adjustable screw pads for simple levelling of system.
- Unit Weight: 15 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Maximum Working Load: 164 kg
- Material: Aluminium

IN-2204
XTIRPA 76 mm HITCH MOUNT WITH 1,524 mm STABILISER
Hitch mount with 1,524 mm (60˝) stabiliser connects to 51 mm (2˝) square vehicle receiver hitches. Use with mast IN-2003 and davit arm IN-2210. Recommended for use with a rescue stretcher. Comes with adjustable screw pads for levelling of the system.
- Unit Weight: 20 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Maximum Working Load: 164 kg
- Material: Aluminium

IN-2305
XTIRPA T-BASE FOR 102 mm MAST
Portable T-base for confined spaces fall protection and retrieval. Use with masts IN-2240 or IN-2313, and davit arm IN-2237.
- Unit Weight: 33 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Aluminium
- Maximum Working Load: 164kg

A2126-10
XTIRPA 90º EXTENSION FOR HITCH MOUNT
This hitch mount extension attaches to hitch mount IN-2126 or IN-2204 and provides a 90° extension for the fall arrest system. Allows vehicle to be parallel with traffic and access confined spaces on the side of the road.
- Unit Weight: 28 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel

A2126-09
XTIRPA 1,829 mm (72″) HITCH MOUNT EXTENSION
This mount extension attaches to hitch mount IN-2126 or IN-2204 and provides an additional 1,829 mm of length.
Usually used in conjunction with universal joint assembly A2126-07.
- Unit Weight: 14k g
- Dimensions: 51.8 mm H x 1,935 mm W x 51.8 mm D
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel

A2126-69
XTIRPA 1,008 mm HITCH MOUNT EXTENSION
This mount extension attaches to hitch mount IN-2126 or IN-2204 and provides an additional 1,008 mm of length.
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel

IN-2517
XTIRPA UNIVERSAL COUPLING BALL ADAPTER
This universal adapter allows the hitch stabiliser systems to be used with the correct types of European vehicles.
- Unit Weight: 8 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Zinc Plated Steel

A2348-05
XTIRPA HITCH MOUNT
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel

A2126-38
XTIRPA 1,008 mm HITCH MOUNT EXTENSION
This mount extension attaches to hitch mount IN-2126 or IN-2204 and provides an additional 1,008 mm of length.
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel

A2305-112
Rescue Anti-Tilt for IN-2305 T-Base
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Steel
- Weight: 6.04 Kg

A2305-55
Height adapter for universal T Base IN-2305
- Unit Weight: 9.5 kg
- Standards meet or exceed ANSI, CSA, OSHA & CE
- Material: Zinc Plated Steel
- Dimensions: L 76 mm x W 419 mm x H 335 mm